Custom Metal Fabrication | Sheet Metal Fabricators | Metal Fabricating | Erie, Pennsylvania
CUSTOMProducts
Prefer a PDF form?

Follow the steps below to receive your FREE custom quote. * Required Fields


Step 1: Pulley Dimensions
Pulley A Measurements
inches
inches

Pulley B Measurements
inches
inches

Spacing Between Pulleys
inches
Belt Guard Pulley Measurement Diagram


Shaft Location *
Both Shafts Left Side

Both Shafts on Left Side
Both Shafts Right Side

Both Shafts on Right Side
B Left Side
A Right Side

B Left Side A Right Side
A Left Side
B Right Side

A Left Side B Right Side
Step 2: Choose Your Features
Belt Guard Style *
two piece hinge and latch design       Hinged
Two-piece style with integrated hinge and latch design. Useful for machines where access to the back is limited. Makes changing belts easy.
two piece design for large covers       Split
Two-piece style that is held together by bolts or latches. Requires access all around the machine. Easier to remove large covers in two pieces.
economical one piece design       Solid
One-piece design is the most simple and economical. Entire cover must be lifted off as one piece to access the belt. (This style requires the Open Bottom Enclosure)
      Shoe Box
Two-piece style with a base and a lid. Fully encloses belts and sheaves. (This style requires the Full Enclosure)
Enclosure Details *
enclose top and sides, leaves bottom open       Open Bottom Enclosure
Encloses the top and the sides of the machines belt. Useful for machines that a full enclosure would not work. This enclosure is available in any of the styles of belt guards except the shoebox style.
completely encloses belt       Full Enclosure
Fully encloses the belt making contact with belt impossible. This enclosure is not available on solid style belt guards.
Finish Option *
    Acrylic Polyurethane Enamel
A durable, wet coat applied, traditional paint finish. Many custom color choices available.
    Raw Metal
The most economical choice, allows you to paint it yourself.
    Powder Coated (Extra Charge + Longer Lead Time)
Electro-statically applied powdered paint, which is then baked for a very durable finish.
Color Desired: (Required for all except "raw metal" option) *
 
Mounting Option *
Support Brackets     Support Brackets
Designed to bolt to the machine and the belt guard.
    None
Vented or Unvented *
enclose top and sides, leaves bottom open
    Venting
Additional metal work can be done to further vent your machine and the belt guard area. Since the design and placement is custom with each style of belt guard, please discuss this with your sales person.
    None
Choose Material *
economical, solid metal     Solid
Made from carbon steel. Has no perforations for air transfer. The most economical option.
perforated metal, best air flow and visual inspection     Perforated Metal
Carbon steel with panels of perforated punched circles. Aids air flow through machine. Allows for easier visual inspection of the belt.
Step 3: Quantity and Contact Information
Quantity and Comments

Name and Contact Information
Address


  Reset Form